About Wieson       |      Products      |      News & Events      |      Contact Us
Home > products > Data Transmission & Storage >  USB Cable
USB Cable
USB 3.0 cable

The specification has been developed with the following objectives:
● Supporting 5Gbps data rate
● Backward compatible with USB 2.0
● Minimizing connector form factor variations
● Managing EMI
● Supporting On-The-Go (OTG)
● Low cost


Compliant Cable Assemblies
The USB 3.0 specification defines the following cable assemblies:
● USB 3.0 Standard-A plug to USB 3.0 Standard-B plug
● USB 3.0 Standard-A plug to USB 3.0 Micro-B plug
● USB 3.0 Standard-A plug to USB 3.0 Standard-A plug
● USB 3.0 Micro-A plug to USB 3.0 Micro-B plug
● USB 3.0 Micro-A plug to USB 3.0 Standard-B plug



USB 3.0 Standard-A plug to
USB 3.0 Standard-B plug
USB 3.0 Standard-A plug to
USB 3.0Micro-B plug
USB 3.0 Standard-A plug to
USB 3.0 Standard-A plug
USB 3.0 Standard-A plug to
USB 3.0 Standard-A receptacle
USB 3.0 Standard-A plug to
USB 3.0 Standard-B plug
USB 3.0 Standard-A plug to
USB 3.0Micro-B plug
USB 3.0 Standard-A plug to
USB 3.0 Standard-A plug
USB 3.0 Standard-A plug to
USB 3.0 Standard-A receptacle


Logo Speed Transmission Power Supply
USB 1.1 Low-speed(1.5Mbps)
Full-speed(12Mbps)
Half-duplex two-wire differentialsignaling
Unidirectional data flow with negotiated diretional bus transitions
5V/500mA
USB 2.0 Low-speed(1.5Mbps)
Full-speed(12Mbps)
High-speed(480Mbps)
5V/500mA
USB 3.0 Low-speed(1.5Mbps)
Full-speed(12Mbps)
High-speed(480Mbps)
Super-speed(5.0Gbps)
Dual-simplex,four-wire differential signaling separate from USB 2.0 Signaling Simultaneous bidirectional data flows 5V/900mA