About Wieson       |      Products      |      News & Events      |      Contact Us
Home > products > Data Transmission & Storage >  USB Cable
USB Cable
USB 2.0 Cable Assembly

NEOSTAR high quality USB 2.0 Cables comply fully with USB 2.0 specification allowing data transfer speeds up to 480Mbps. They are also backward compatible with USB 1.1 specification and will work with all USB devices LIKE Pocket CD, Pocket DVD, Pocket CDRW, Pocket DVD/CDRW, Pocket ExDrive, Mobile CDRW, Mobile DVD/CDRW, Mobile DVD-R/RW, Combo Hard Drive on the market!

  ★ 480 Mb/sec data throughput when connect to USB 2.0 host controller
★ Increases speed of the peripheral-to-PC connection
★ Complies with standard specification of USB 2.0 and USB 1.1
★ USB 2.0 connector , pin 30u" gold plated
★ USB 2.0 supports up to 127 devices
★ Already on the USB 2.0 integrators list of USB IF
★ Plug & play under Windows 98SE, 2000 PRO, Me, XP, Mac 9.X
Cable construction
  The fully shielded connector will have six contacts. The connector plug termination can be made by crimp, insulation displacement, insulation piercing and soldering.
The cable consist of two twisted pairs (signal pair) & two power conductors. The signal pair carry to balanced differential data signal, while the power conductors carry the bus power (about 8-40V DC).

The signal pair will have individual braid (60-65%) shield. And overall cable had a outer shield (90-95% braid copper wire over spiral wrap metallized polyester tape, with the metal to the outside).